JVC CRT Television 50051243 User Manual

ENGLISH  
AV-28RH4BU  
AV-28RH4SU  
FRANÇAIS  
DEUTSCH  
ITALIANO  
CASTELLANO  
NEDERLANDS  
PORTUGUÊS  
COLOUR TELEVISION  
INSTRUCTIONS  
VICTOR COMPANY OF JAPAN, LIMITED  
TELEVISEUR COULEUR  
FARBFERNSEHGERÄT  
TELEVISORE A COLORI  
TELEVISOR A COLOR  
KLEURENTELEVISIE  
TELEVISOR A CORES  
MANUEL D'INSTRUCTIONS  
BEDIENUNGSANLEITUNG  
ISTRUZIONI  
MANUAL DE INSTRUCCIONES  
GEBRUIKSAANWIJZING  
INSTRUÇÕES  
50051243  
©2004 VICTOR COMPANY OF JAPAN, LIMITED  
0504-JVC  
 
Contents  
Safety Precautions  
Safety Precautions ...................................................1  
Remote Control Buttons ..........................................2  
Control Panel Buttons..............................................3  
Antenna Connections ...............................................3  
1. Power Source  
The receiver should be operated only from a 220-240V AC,  
50 Hz. outlet. Ensure you select the correct voltage setting  
for your convenience.  
2. Power Cord  
The power supply cord should be placed so that they are not  
likely to be walked on or pinched by items placed upon them  
or against them. Pay particular attention to cord where they  
enter the plug, power outlet, and the point where they exit  
from the receiver.  
Preparation................................................................4  
Features .......................................................................... 4  
Before Switching on your TV..................................4  
Power connection............................................................. 4  
Aerial Connections ........................................................... 4  
How to connect the external equipments.......................... 4  
Inserting batteries in the remote control handset .............. 4  
3. Moisture and Water  
Do not use this equipment in a humid and damp place (avoid  
the bathroom, the sink in the kitchen, and near the washing  
machine). Do not expose this equipment to rain or water and  
Switching the TV ON/OFF ........................................4  
To switch the TV on.......................................................... 4 do not place objects filled with liquids on it as this may be  
To switch the TV off .......................................................... 4 dangerous.  
Initial Settings ...........................................................5  
4. Cleaning  
T-V LINK .......................................................................... 5  
Operating with the onset buttons...................................... 6  
Operating with Remote Control......................................... 6  
Before cleaning, unplug the receiver from the main supply  
outlet. Do not use liquid or aerosol cleaners. Use with soft  
and dry cloth.  
Menu System .............................................................7  
5. Ventilation  
Picture Menu ................................................................... 7  
Sound Menu..................................................................... 7  
Install (Installation) Menu.................................................. 8  
Using the Decoder (EXT-2) function .................................10  
Feature Menu.................................................................. 11  
The slots and openings on the receiver are intended for venti-  
lation and to ensure reliable operation. To prevent overheating,  
these openings must not be blocked or covered in anyway.  
6. Lightning  
In case of storm and lightning or when going on holiday, dis-  
connect the power cord from the wall outlet.  
Other Features........................................................12  
Sound Mute ....................................................................12  
Stereo / Bilingual .............................................................12  
Information on Screen .....................................................12  
To Display the Time.........................................................12  
Picture ............................................................................12  
VCR Control Buttons.......................................................12  
7. Replacement Part  
When replacement parts are required, be sure the service  
technician has used replacement parts which are specified  
by the manufacturer or have the same specifications as the  
original one. Unauthorized substitutions may result in fire,  
electrical shock, or other hazards.  
Teletext ....................................................................12  
8. Servicing  
To operate Teletext ..........................................................12  
To select a page of Teletext .............................................12  
To Select Index Page ......................................................12  
Searching for a teletext page while watching TV..............12  
To Select Double Height Text ..........................................13  
To Reveal “concealed” Information ...................................13  
To StopAutomatic Page Change .....................................13  
To Select a Subcode Page ..............................................13  
To exit Teletext ................................................................13  
Fastext and Toptext ........................................................13  
Please refer all servicing to qualified personnel. Do not re-  
move cover as this may result in electric shock.  
9. Flame sources  
Do not place naked flame sources on the apparatus.  
10. Stand-By  
Do not leave your TV stand-by or operating condition when you  
leave your house.  
Warning!  
Connect the External Equipments........................14  
Any intervention contrary to regulations, in particular, any  
modification of high voltage or a replacement of the picture  
tube may lead to an increased concentration of x-rays. Any  
television modified in this way no longer complies with license  
and must not be operated.  
Via the Euroconnector.....................................................14  
T-V LINK compatible VCR ...............................................14  
RGB mode ......................................................................14  
EXT-2 S Mode .................................................................14  
Via the RCA jacks...........................................................14  
Via the ANT (aerial) socket..............................................14  
TV and Video Recoder (VCR) ..........................................14  
NTSC Playback ..............................................................14  
Copy Facility...................................................................14  
Connecting Headphones .................................................14  
Instructions for waste disposal:  
Packaging and packaging aids are recyclable and should  
principally be recycled. Packaging materials, such as foil  
bag, must be kept away from children.  
Batteries, including those which are heavy metal-free, should  
not be disposed of with household waste. Please dispose of  
used batteries in an environmentally sound manner. Find out  
about the legal regulations which apply in your area.  
Tips...........................................................................16  
Specifications..........................................................16  
ENGLISH - 1 -  
 
Remote Control Buttons  
= Stand By / Power  
0 - 9 = Direct Program  
STANDARD Button (Picture Mode Change)  
Colour Buttons  
RED: Zoom (Picture Size) Change  
GREEN: Hyper Sound  
YELLOW: Factory Settings in Picture Menu  
MENU = Menu Button  
(
) = Cursor Up / Programme Up  
) = Cursor Right / Volume +  
(
Teletext Control Buttons  
VCR Control Buttons  
(
) = Cursor Down / Programme Down  
) = Cursor Left / Volume -  
(
AV = AV Button  
= Information Button / T-V Link in Program Menu  
= Mute  
CAUTION  
RISK OF ELECTRIC SHOCK  
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of  
uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk  
of electric shock of persons.  
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating  
and maintenance (servicing) instructions in the literature accompanying the appliance.  
ENGLISH - 2 -  
 
Control Panel Buttons  
$9ꢀꢁꢂ5+ꢃ%8  
$9ꢀꢁꢂ5+ꢃ68  
&21752/  
3$1(/  
%877216  
Antenna Connections  
ENGLISH - 3 -  
 
Preparation  
Before Switching on your TV  
Power connection  
Place TV on a solid surface.  
Important: The TV set is designed to operate on 220-240 V  
AC, 50 Hz.  
For ventilation, leave a space of at least 10 cm free all around  
the set. To prevent any fault and unsafe situations, please do  
not place any objects on top of the set.  
• After unpacking, allow the TV set to reach the ambient room  
temperature before you connect the set to the mains.  
“Use this apparatus in tropical and moderate climates.”  
Aerial Connections  
• Connect the aerial plug to the aerial input socket located at  
the back of the TV.  
Features  
• It is a remote controlled colour television.  
• 100 programmes from VHF, UHF bands or cable channels  
can be preset.  
How to connect the external equipments  
See “Connect the External Equipments” on page 15.  
• It can tune cable channels.  
• See the instruction manuals provided with the external de-  
vices too.  
• Controlling the TV is very easy by its menu driven system.  
• It has two Euroconnector sockets for external devices (such  
as video recorder, video games, audio set, etc.)  
Inserting batteries in the remote control handset  
• Remove the battery cover located on the back of the hand-  
set by gently pulling upwards from the indicated part.  
• Front AV (EXT-3) Input available.  
• Stereo sound systems (German+Nicam) are available.  
• Full function Teletext (Fastext, Toptext).  
• It is possible to connect headphone.  
• Direct channel access.  
• Insert two AA (R6) or equivalent type batteries inside.  
• Replace the battery cover.  
• A.P.S. (Automatic Programming System).  
• All programmes can be named.  
• Forward or backward automatic tuning.  
• Sleep timer.  
• Child Lock.  
• Blue Background.  
• Comb Filter : Digital circuitry to make adjustments providing  
outstanding picture quality with sharp, crisp edges, while vir-  
tually eliminating dot crawl.  
NOTE: Remove batteries from remote control handset when it is  
not to be used for a long period. Otherwise it can be damaged  
due to any leakage of batteries.  
• CTI : (Colour Transient Improvement) Improvement of hori-  
zontal transitions of chrominance (colour) signals.  
Switching the TV ON/OFF  
• T-V Link.  
You can operate your TV either using the remote control  
handset or directly using the TV onset buttons.  
• Automatic sound mute when no transmission.  
• When no valid signal is detected, after 5 minutes the TV  
switches itself automatically to stand-by mode.  
To switch the TV on  
• WSS (Wide Screen Signaling).  
• NTSC Playback.  
Your TV will switch on in two steps:  
1- Press the power button located on the front of the TV. Then  
the TV switches itself to standby mode and the RED LED  
located below the TV turns on.  
2- To switch on the TV from stand-by mode either:  
Press a digit button on the remote control so that a program-  
me number is selected,  
or,  
Press Standby / Power Button or Programme Up and Down  
buttons on the TV or on the remote control respectively, so  
the TV will switch on and the RED Led will turn GREEN.  
IMPORTANT:  
If no aerial signal is received at the selected program for a  
period of 5 minutes then your TV automatically switches  
into stand-by mode.  
To switch the TV off  
• Press the stand-by button on the remote control, so the TV  
will switch to stand-by mode and the GREEN LED will be-  
come RED, or,  
• Press the power button located on the front of the TV.  
ENGLISH - 4 -  
 
NOTE: If you have switched of the TV set from the power but-  
ton instead of the remote control, next time you press the  
power button, the TV set will switch on without going to the  
stand-by mode.  
The AUTOSTORE function automatically stores the re-  
ceived channels in your TV's programme numbers.  
Initial Settings  
When the TV is first turned on. It enters the initial setting  
mode, and the AUTOSTORE menu is displayed. Follow the  
instructions below to do the initial settings.  
The AUTOSTORE menu does not appear when your TV has  
been turned on once. In this case, use the “LANGUAGE”,  
COUNTRY” and “AUTOSTORE” items in the INSTALL  
menu to make the initial settings. For details, see “Install  
(Installation) Menu” on page 8.  
APS: Automatic Programming System  
After the AUTOSTORE is finalized, “PROGRAM” menu ap-  
pears. You can delete a channel or change a programme  
number. For details, see “PROGRAM Menu” on page 10.  
If you want to do the initial settings later, press “STAN-  
DARD” button to turn the menu off.  
1. Press "  
" or "  
" button to select "LANGUAGE"  
item. Then press the “ ” or “ ” button to enter the "LAN-  
GUAGE" sub-menu.  
8. If you do not have a T-V LINK compatible VCR, press  
STANDARD” button to exit the menu.  
If you have a T-V LINK compatible VCR connected to the  
EXT-2 terminal, press “ ” button to display “T-V LINK”  
menu. Then follow the operating procedure “Downloading  
data to VCR” in the following “T-V LINK” section.  
2. Press "  
press the “ ” or “ ” button to store it.  
" or "  
" button to select a language. Then  
3. Press the MENU button to return to the AUTOSTORE  
menu.  
4. Press "  
" or "  
" button to select "COUNTRY" item.  
Then press the “ ” or “ ” button to enter the "COUNTRY"  
sub-menu.  
If a channel you want to view is not stored, store it using  
the TUNING menu. For details, see “Tuning Menu” on  
page 9.  
T-V LINK  
When a T-V LINK compatible VCR is connected to the EXT-2  
Terminal on the TV, it is easier to set up the VCR and to view  
videos. T-V LINK uses the following features:  
To use T-V LINK functions:  
A “T-V LINK compatible VCR” means a JVC video cassette  
recorder with the T-V LINK logo, or with one of the following  
logos. However, these VCRs may support some or all of the  
features described earlier. For details, see your VCR instruc-  
tion manual.  
5. Press "  
" or "  
" button to select the country where  
you are now located. Then press the “ ” or “ ” button to  
store it.  
6. Press the MENU button to return to the AUTOSTORE  
menu.  
Q-LINK” (a trademark of Panasonic Corporation)  
Data Logic” (a trademark of Metz Corporation)  
7. Press “  
” or “  
” button to select “Continue” item.  
Then press “ ” button to start the AUTOSTORE function.  
ENGLISH - 5 -  
 
Easy Link” (a trademark of Phillips Corporation)  
Megalogic” (a trademark of Grundig Corporation)  
SMARTLINK” (a trademark of Sony Corporation)  
TV auto power on/VCR image view:  
When the VCR starts playing, the TV automatically turns on  
and the images from EXT.2 (EXT-2) terminal appear on the  
screen.  
Downloading data to VCR:  
This function does not happen if your TV’s main power  
is turned off. Set your TV’s main power to on (standby  
mode).  
The VCR will automatically download the registered data on  
the TV channels from the TV. This means you do not need to  
set up the programme channels on your VCR manually.  
Operating with the onset buttons  
The “T-V LINK” menu will be displayed when you press the  
Volume setting and programme selection can be made using  
the buttons on the right side of the TV.  
” button while “PROGRAM” menu is displayed, or when-  
ever the “INSTALL” menu operations are performed.  
Volume Setting:  
• Press “-  
” button to decrease volume or “  
+” button to  
increase volume, so a volume level scale will be displayed  
on the screen.  
Programme Selecting:  
Press “ ” button to start downloading data to VCR.  
• Press “P/Ch+” button to select next programme or “P/Ch-”  
button to select the previous programme.  
• If you do not want to do, press the “STANDARD” button to  
exit the menu.  
Entering Main Menu:  
• Press “MENU” button to enter main menu. In the main  
menu select submenu using “P/Ch+” or “P/Ch-” button and  
enter the submenu using “  
+” or “-  
” button. To learn  
the usage of the menus, refer to the Menu System section  
of this manual.  
When “FEATURE NOT AVAILABLE” is displayed:  
If “FEATURE NOT AVAILABLE” is displayed, the download  
was not performed correctly. Before trying to download again,  
check that:  
Operating with Remote Control  
The remote control handset of your TV is designed to control  
all the functions of the model you selected. The functions will  
be described in accordance with the menu system of your  
TV.  
• The VCR power is turned on  
• The VCR is T-V LINK compatible  
• The VCR is connected to the EXT-2 terminal  
• The SCART cable is fully wired.  
Functions which you can use out of menu system are de-  
scribed below.  
Direct Rec:  
Volume Setting:  
What You See Is What You Record”  
Press “ ” button to increase volume.  
You can easy record to VCR the images that you are watch-  
ing on the TV. For details, read the manual for your VCR, Use  
your VCR controls. You cannot carryout Direct Rec using  
your TV’s control.  
Press “ ” button to decrease volume.  
Programme Selecting (Previous or next programme):  
• Press “  
• Press “  
” button to select the previous programme.  
“ button to select the next programme.  
When the VCR is not ready (for example when there is no  
tape inserted), “NO RECORDING” is displayed.  
In the following situations, the VCR will stop recording if the  
TV is turned off, if the TV channel or input is changed, or if  
the menu is displayed on the TV:  
Programme Selecting (direct access):  
• When recording images from an external device connected  
to the TV. (for example a camcorder)  
Press digit buttons on the remote control handset to select  
programmes between 0 and 9. TV will switch to the selected  
program after a short delay.  
• When recording a TV channel after it has been unscrambled  
on a decoder.  
• For a two or three digit program number enter the second or  
third digit after pressing the first digit within 2 seconds.  
• When recording a TV channel by using the TV’s output be-  
cause the VCR’s own tuner cannot properly receive that  
channel.  
ENGLISH - 6 -  
 
• You can change the Contrast by “ ” or “ ” button after se-  
lecting this item.  
Menu System  
Your TV has been designed with a menu system. Display  
MENU” (main menu) and enter one of four menus (PICTURE,  
SOUND, INSTALL and FEATURE).  
You can change Colour only when Picture Mode is selected  
User.  
1- Press “MENU” button to display “MENU” (main menu). The  
menu titles will be displayed in the main menu.  
• You can change the Colour by “ ” or “ ” button after select-  
ing this item.  
2- Press “  
“ or “  
” button to select a menu title, then  
press “ ” or “ ” button to enter the menu.  
To exit a menu, press “STANDARD” button.  
To go to the previous menu, press “MENU” button.  
• You can change the Sharpness by “ ” or “ ” button after  
selecting this item.  
Picture Menu  
• You can adjust the Colour Temp item as Normal, Warm  
and Cool. Using “ ” or “ ” button toggle between these  
three settings.  
To change picture settings:  
• Press “MENU” button, now you are in main menu. In the  
main menu, select PICTURE using “  
“ or “  
” button,  
then enter the picture menu pressing “ ” or “ ” button.  
Note: When Picture Mode is not “USER”, BRIGHTNESS,  
CONTRAST and COLOUR options can not be reached by  
• The Noise reduction can be adjusted in four different lev-  
els: Minumum, Medium, Maximum and Auto. Addition-  
ally it can be cancelled by selecting the OFF option. Press-  
ing “ ” or “ ” button toggles between these five settings.  
“ or “  
” buttons.  
Factory Settings:  
In the Picture Menu if you press the YELLOW button the ad-  
justmens switches themselves to the factory settings.  
• The Zoom can be three different modes: Auto, 4:3 or 16:9  
modes. Using “ ” or “ ” button toggle between these differ-  
ent screen formats.  
You can change the values of this items firstly by selecting  
the item by “  
“ or “  
” button and then by using “ ” or  
“ ” button. The PICTURE menu disappears and level indica-  
tors are displayed while items are changed. The PICTURE  
menu is restored after adjustment is finished.  
The Picture Mode can be stored for all channels (200 chan-  
nels) individually.  
It is also possible to change picture modes directly by press-  
This item is used to change the picture mode. By pressing  
“ ” or “ ” button you may choose one of these options:  
Bright, Standard, Soft, User.  
ing “ZOOM” button (RED button) on your remote control.  
• You can change the Hue for NTSC 3.58/4.43 systems by  
“ ” or “ ” button after selecting this item. A level indicator for  
Hue is displayed while changing this item. The Hue bar is  
displayed while an NTSC signal is input from the EXT-1,  
EXT-2, or EXT-3 (Front AV) terminal.  
Recalling Factory settings.:  
You can re-set the current PICTURE menu settings (except  
Noise Reduction and Colour Temp settings) to the default  
settings.  
You can change Brightness only when Picture Mode is se-  
lected User.  
• Press “STANDARD” button when no menu appears.  
• You can change the Brightness by “ ” or “ ” button after  
selecting this item.  
Sound Menu  
To change sound settings:  
• Press “MENU” button, now you are in main menu. In the  
You can change Contrast only when Picture Mode is select-  
ed User.  
main menu, select SOUND using “  
“ or “  
” button,  
then enter the sound menu pressing “ ” or “ ” button.  
ENGLISH - 7 -  
 
Hyper Sound can be set On or Off also by GREEN button.  
Stereo Mode:  
You can use this feature to switch the broadcasting languge  
the dubbed or original language. Some TV channels broad-  
casts the programmes in two languages. If the TV channel  
you are watching broadcasts in two languages (e.g. Euro-  
sport), you can select the dubbed or original language by set-  
ting this item to DUAL I or DUAL II by pressing “ ” or “ ” but-  
ton. the other options of this item are MONO and STEREO  
(NICAM STEREO).  
Setting Volume:  
Using “ “ or “  
” button to select Volume.  
• Press “ ” button to increase volume.  
• Press “ ” button to decrease volume.  
If the stereo broadcast is received poorly, you can change  
this item from Stereo to mono sound so that you can hear the  
broadcast more clearly and easily.  
Install (Installation) Menu  
• Press “MENU” button, now you are in main menu. In the  
main menu, select INSTALL, using “  
“ or “  
” button.  
Then enter the INSTALL menu pressing “ ” or “ ” button.  
Setting Balance:  
• Using “  
“ or “  
” button select Balance.  
• Press “ ” button to change balance rightward.  
• Press “ ” button to change balance leftward.  
Setting Bass Level:  
• Using “  
“ or “  
” button select Bass.  
Menu Language Selection:  
• Press “ ” button to increase bass level.  
• Press “ ” button to decrease bass level.  
Press the “  
item.  
“ or “  
” button to select “LANGUAGE”  
Press “ ” or “ ” button to enter “LANGUAGE” sub-menu.  
Setting Treble Level:  
• Using “  
“ or “  
” button select Treble.  
• Press “ ” button to increase treble level.  
• Press “ ” button to decrease treble level.  
Press “  
guage:  
“ or “  
” button to select the desired menu lan-  
• After selecting the menu language press “ ” or “ ” button to  
store the selected language.  
• Press MENU button to return to the INSTALL menu, or  
Press STANDARDbutton to exit the menu.  
Country Selection:  
Hyper Sound:  
You can use this feature to switch on or off Hyper Sound.  
Pressing “ ” or “ ” button will turn on or off this feature. If the  
current sound system is MONO and the Hyper Sound is set  
ON, then the sound will be heard as if it is STEREO. If the  
current sound system is STEREO, switching Hyper Sound on  
will make the sound deeper. Switching it off will make no  
change in MONO and STEREO.  
• Press the “  
item.  
“ or “  
” button to select the “COUNTRY”  
• Press “ ” or “ ” button to enter the “COUNTRY” sub-menu.  
ENGLISH - 8 -  
 
4. If you do not have a T-V LINK compatible VCR, press  
STANDARD” button to exit the menu.  
If you have a T-V LINK compatible VCR connected to the  
EXT-2 terminal, follow the operating procedure “Down-  
loading the data to VCR” on page 6 to transmit the Pro-  
gramme table data to the VCR.  
• Press “  
you are now located.  
” or “  
” button to select the country where  
• After selecting the country, press “ ” or “ ” button to store  
the selected country.  
Search:  
• Press MENU button to return to the INSTALL menu, or  
Press STANDARD button to exit the menu.  
You can search a channel manually.  
• Select "Search" item. Then press “ ” or “ ” button to start  
searching. "SEARCHING" is displayed while the TV is  
searching a channel.  
Tuning Menu:  
You can store a channel manually, or modify the current set-  
tings of a channel (for example, changing the channel name).  
• Searching stops when the TV finds a channel. Then the  
channel is displayed.  
In an AV mode, you can change only the “MODE” or “CO-  
LOUR SYSTEM” setting.  
• Press “ ” or “ ” button repeatedly until the channel you want  
appears.  
• If you want to modify the current settings of a channel, se-  
lect the channel of which you want to modify the setting.  
Then display the main menu on the screen.  
• When you cannot search a channel you want, select the  
"Standard" item and select other broadcasting system.  
Then start searching again.  
• Press “  
“ or “  
” button to select “TUNING” item.  
• Press “ ” or “ ” button to enter “TUNING” menu.  
Standard:  
• If you cannot hear the normal sound even when the picture  
appears normally, select the correct broadcasting system to  
hear the sound normally.  
• Select "Standard" item. Then press “ ” or “ ” button to se-  
lect a broadcasting system.  
Colour system:  
• If the picture is not clear or no colour appears, select the  
correct colour system to display the picture normally.  
• Select "Colour system" item. Then press “ ” or “ ” button  
to select a colour system.  
Band, Channel:  
• If you know a channel number, you can find it directly by  
entering the channel number.  
• Select the "Band" item. Then press “ ” or “ ” button to se-  
lect the band (C or S) where the channel you want is lo-  
cated.  
1. Press “  
“ or “  
” to select an item in the “TUNING”  
menu. Then press “ ” or “ ” button to change the setting.  
2. After all settings of a channel are completed, press “  
or “  
” button to select “Programme” item. Then press  
“ ” or “ ” button to select a programme number which you  
want to store the setting.  
• Select the “Channel” item. Then press “ ” or “ ” button to  
select the channel number, or enter the channel number  
with the digit buttons. The available channel numbers differ  
depending on your “COUNTRY” and “Standard” settings.  
3. Press “  
“ or “  
” button to select “Store” item. Then  
press “ ” or “ ” button to store the setting.  
The "STORED" appears at the bottom of the menu for 3 Fine tuning:  
seconds. Then T-V LINK menu appears.  
If the channel reception is poor, fine-tune the channel.  
ENGLISH - 9 -  
 
7. Follow the operating procedure “Downloading the data  
to VCR” on page 6 to transmit the revised programme  
table data to the VCR.  
• Select "Fine tuning" item. Then press “ ” or “ ” button to  
fine -tune the channel.  
• If you do not want to transmit, press “STANDARD” but-  
ton to exit the menu.  
Name:  
Note:  
You can store the channel name or change it.  
You can only use this item if you have a decoder connected  
to a T-V LINK compatible VCR to EXT-2 terminal. Setting this  
item to “ON” by mistake causes the picture/sound of a TV  
channel you are currently viewing to disappear.  
• Select “Name” item. Then press “ ” or “ ” button to display  
a cursor.  
• Press “  
” or “  
” button to select a character and  
press “ ” or “ ” button to move the cursor.  
If this item has been set to “ON” but the TV channel cannot  
• After the name is completed, press the MENU button.  
be unscrambled, check the following:  
• Has the decoder been connected to the VCR properly ac-  
cording to the VCR and Decoder instruction manuals?  
Mode:  
• Can the TV channel be unscrambled with a decoder?  
Set "Mode" item to "TV" for the TV channels.  
• Do you need to change the VCR settings in order to con-  
nect the decoder? Confirm that the VCR is set properly by  
rechecking the VCR instruction manual.  
• When you watch a picture from your VCR and the picture is  
unstable, you may improve it by changing the "Mode" set-  
ting from "TV" to "VCR".  
Program Menu:  
You can use the PROGRAM menu to change a programme  
number, delete a channel.  
Decoder (EXT-2):  
You can only set “Decoder (EXT-2)” item to “ON” if you have  
a decoder connected to a T-V LINK compatible VCR, which  
in turn is connected to the EXT-2 terminal. To use this item,  
please see the  
• Press “  
“ or “  
” button to select “PROGRAM” item.  
• Press “ ” or “ ” button to enter the PROGRAM menu.  
Using the Decoder (EXT-2) function” on the following sec-  
tion.  
Store:  
After the all settings are completed, store the new channel’s  
setting to the programme number which you selected.  
• Press “  
“ or “  
” button to select “Store”, then press  
“ ” or “ ” to store it.  
Using the Decoder (EXT-2) function  
If you have a decoder connected to a T-V LINK compatible  
VCR, which in turn is connected to the EXT-2 terminal, use  
DECODER (EXT-2) to unscramble the scrambled TV chan-  
nels.  
1. Exit the menu.  
To choose a channel in the PROGRAM menu:  
2. Turn on the decoder power.  
Press “  
“ / “  
”/ “ ” / “ ” button.  
3. Display the scrambled TV channel on the TV. Even if the  
decoder is working, a scrambled picture appears.  
The colour of the programme number that you choose is  
changed in the PROGRAM menu and you can view the pic-  
ture of that channel.  
4. Display the “INSTALL.” menu again.  
5. Press “  
” or “  
” button to select DECODER (EXT-2),  
Caution:  
then press “ ” or “ ” button to set to “ON”  
Using “DELETE” or “CHANGE” item rewrite the current chan-  
nel list in the PROGRAM menu. Therefore, the programme  
numbers of some of channels will change.  
6. Press “  
” or “  
” to select STORE, then press “ ” or  
“ ” button to store it. “T-V LINK” menu will appear after the  
TV stores the setting.  
When you complete the settings of PROGRAM menu:  
If you have a T-V LINK compatible VCR, press the “ ” but-  
ton to display the T-V LINK menu. Then follow the operating  
procedure “Downloading the data to VCR” on page 6 to  
transmit the Programme table data to the VCR.  
ENGLISH - 10 -  
 
If you do not have a T-V LINK compatible VCR, press “STAN-  
DARD” button to exit the menu.  
4. After the AUTOSTORE is finalized, the PROGRAM menu  
appears.  
To change a programme number (CHANGE):  
Please see “Program Menu” on above section.  
Feature Menu  
1. Select a channel that you want to change its programme  
number.  
2. Press Blue button to enter the CHANGE mode.  
• Press “MENU” button, now you are in main menu. In the  
3. Press “  
“ / “  
”/ “ ” / “ ” button to select the pro-  
main menu, select FEATURE, using “  
“ or “  
” button.  
gramme number that you want to change the programme  
number of the selected channel to.  
Then enter the feature menu pressing “ ” or “ ” button.  
4. Press Blue button. Two channels of the selected program-  
me numbers will be exchanged.  
To delete a channel (DELETE):  
1. Select a channel that you want to delete.  
2. Press Red button to delete it.  
Autostore Menu:  
The AUTOSTORE function automatically programmes the re-  
ceived channels in your TV's programme numbers.  
Sleep timer:  
Before use this function, please confirm that the “LAN-  
GUAGE” and “COUNTRY” setting are correct.  
The sleep timer is used to turn the TV off after a defined peri-  
od. Press “ ” or “ ” button to choose a priod of time after se-  
lecting this item. The timer can be programmed between Off  
and 120 minutes in steps of 10 minutes. One minute before  
the "Sleep timer" function turns the TV off, the remaining  
time will be displayed.  
1. Press “  
“ or “  
” button to select “AUTOSTORE”  
item.  
2. Press “ ” or “ ” button to enter the AUTOSTORE menu.  
Child lock:  
You can disable the control panel buttons (except the POW-  
ER button) with this item.  
Press “ ” or “ ” button to change the setting to ON or OFF  
after selecting this item.  
• A warning message “All prestored programmes will be  
erased!” appears in a message box.  
When you set this item to ON, the TV can be operated only  
by using the remote control handset.  
3. Press “ ” button to start the AUTOSTORE function.  
To cancel the AUTOSTORE function, press the “STAN-  
DARD” button.  
Warning: If Child Lock item is set to ON, the TV can not be  
operated by VCR.  
Setting External Source Output:  
• You can use this menu to select the internal or external  
source that will be output at EXT.2 (EXT-2) terminal.  
• In the “FEATURE” menu select “EXT-2 Output” using “  
or “ ” button. Then select the source you want to be out-  
put at EXT-2 pressing “ ” or “ ” button (one of the sources:  
TV, EXT-1 or EXT-3 (Front AV).  
ENGLISH - 11 -  
 
• If your device is not made by JVC, these buttons cannot be  
used.  
• Even if your device is made by JVC, some of these buttons  
or any one of the buttons may not work, depending on the  
device.  
Blue Background During No-Signal:  
The Blue Back feature can be set by “ ” or “ ” button to ei-  
ther On or Off.  
• You can use the  
/
buttons to choose a TV channel  
which the VCR will receive.  
Teletext  
Other Features  
Teletext is an information system that displays text on your  
TV screen. Using the Teletext information system you can  
view a page of information on a subject that is available in the  
list of contents (index).  
Sound Mute  
To cut off the sound of the TV press “ ” button. The sound  
will be cut off. To cancel mute, press “ ” or “ ” or “ ” but-  
ton. The volume level will be the same as the level before  
No on screen display will be available in text mode.  
While no teletext information available in the selected pro-  
gramme, if you press (teletext) “ ” button,”No Teletext  
Transmission” warning appears at the center of the screen.  
mute if you cancel mute pressing “ ” button again.  
Stereo / Bilingual  
No contrast, brightness or colour control, but volume control  
is available in text mode.  
• If the TV channel you are watching broadcasts in two lan-  
guages (e.g. Eurosport), you can select the dubbed or the  
original language, by setting Stereo Mode to Dual I or  
Dual II in Sound menu.  
To operate Teletext  
• Select a TV station on which Teletext is being transmitted.  
• When the stereo broadcast is received poorly, you can  
change from stereo to mono sound so that you can hear the  
broadcast more clearly and easily.  
• Press (teletext) “ ” button. Usually the list of contents (in-  
dex) is displayed on the screen.  
Information on Screen  
First pressing the “ ” button displays the current status  
Programme number”, “Station name” and “Sound sta-  
tus”.  
Pressing this button again displays the current time.  
Pressing this button once more remove the on-screen dis-  
play.  
To select a page of Teletext  
To Display the Time  
• Press the appropriate digit buttons for the required Teletext  
page number.  
• While watching a TV programme with Teletext transmission  
press “ “ button twice. The current time information, cap-  
tured from Teletext will be displayed at the upper left corner  
of the screen.  
The selected page number is displayed at the top left corner  
of the screen. The Teletext page counter searches until the  
selected page number is located, so that the desired page is  
displayed on the screen.  
• If the programme being watched does not have Teletext  
transmission, no time information will be displayed.  
• Press “  
“ button to move the Teletext screen forward  
• The time information will disappear after pressing “ “ but-  
ton again.  
one page at a time.  
• Press “  
” button to move the Teletext screen backward  
one page at a time.  
Picture  
You can change Picture Mode settings by pressing “STAN-  
DARD” button when no menu appears.  
Recalling Factory settings.:  
You can re-set the current PICTURE menu settings (except  
Noise Reduction and Colour Temp settings) to the default  
settings.  
To Select Index Page  
• Press “STANDARD” button when no menu appears.  
To select the page number of the index (generally page  
100), press “ “ button.  
VCR Control Buttons  
The buttons can be used to operate a JVC brand VCR.  
Pressing the button having the same appearance as the origi-  
nal remote control button of a device makes the function work  
in the same way as the original remote control.  
Searching for a teletext page while watching TV  
• In the Teletext mode pressing “ “ button will switch the  
screen to the TV mode. In the TV mode enter a page num-  
ber using digit buttons. As you enter last digit of page num-  
ber, “ ” sign will replace the page number and flash until  
Press the VCR Control Button to control your VCR.  
Note:  
ENGLISH - 12 -  
 
the entered page number is found. Then the page number • Press an appropriate RED, GREEN, YELLOW or BLUE but-  
ton in order to reach the relevant page quickly.  
will replace “ ” sign again. Now you can display this tele-  
text page pressing “ “ button.  
For TOPTEXT:  
To Select Double Height Text  
If Toptext transmission is present, colour coded buttons will  
appear in status row.  
• Press “ “ button for the top half of the information page to  
be displayed in double height text.  
If Toptext transmission is not present, status row will not ap-  
pear.  
• Press “ “ button again for the bottom half of the informa-  
tion page to be displayed in double height text.  
In Toptext mode the “  
“ or “  
” commands will request  
the next or previous page respectively. If Toptext transmission  
is not available, in case of operation of these commands,  
wraparound occurs. For example page 100 appears to be one  
greater than page 199.  
• Press “ “ button once more for the full page of normal  
height text.  
To Reveal “concealed” Information  
• Pressing “ “ button once will reveal answers on a quiz or  
games page.  
• Pressing “ “ button again will conceal the revealed an-  
swers.  
To Stop Automatic Page Change  
The teletext page you have selected may contain more infor-  
mation than what is on the screen; the rest of the information  
will be displayed after a period of time.  
• Press “ “ button to stop the automatic page change.  
• Press “ “ button again to allow the next page to be dis-  
played.  
To Select a Subcode Page  
Subcode pages are subsections of long Teletext pages that  
can only be displayed on the screen one section at a time.  
• Select the required Teletext page.  
• Press “ “ button.  
• Select the required subcode page number by pressing four  
digit buttons (e.g. 0001).  
• If the selected subcode page is not displayed in a short  
time, press “ “ button. TV programme will be displayed on  
the screen.  
Teletext page number will be displayed on the upper left cor-  
ner of the screen when the selected page is found.  
• Press “ “ button to display the selected Teletext page.  
To exit Teletext  
• Press “ ” button. The screen will switch to TV mode.  
Fastext and Toptext  
Teletext mode will be selected according to transmission au-  
tomatically.  
Your CTV supports the 7 page Teletext system. When the  
page number of any of the 7 pages in memory is entered, the  
system will not search for the requested page; instead it will  
display the page automatically.  
• Press “  
“ button to move the Teletext screen forward  
one page at a time.  
• Press “  
” button to move the Teletext screen backward  
one page at a time.  
For Fastext and Toptext:  
The subject-heading for the information may have a particular  
colour or can be in a form located in a coloured box.  
ENGLISH - 13 -  
 
NTSC Playback  
Connect the External Equipments  
Connect a NTSC video recorder to a terminal. Then press  
AV“ button to select the corresponding AV mode.  
Via the Euroconnector  
NTSC 3.58/4.43 system is detected automatically in AV  
mode.  
Your TV set has two Euroconnector sockets. If you want to  
connect equipments (e.g. video recorder, decoder, etc.) which  
have Euroconnectors, to your TV, use the EXT.1 (EXT-1),  
EXT.2 (EXT-2) terminals.  
Copy Facility  
You can output the video and audio signals which inputs from  
TV, EXT.1 (EXT-1) or Front AV (EXT-3) terminal to the video  
recorder connected to the EXT.2 (EXT-2) terminal.  
T-V LINK compatible VCR  
Be sure to connect the T-V LINK compatible VCR to the  
EXT-2 terminal. If not, the T-V LINK function will not work  
properly.  
To select the output source, see “Setting External Source  
Output ” on page 11.  
• When connecting a T-V LINK compatible VCR to the EXT-2  
terminal, be sure to connect the decoder to the VCR. If not,  
the T-V LINK function may not work properly. And then set  
the DECODER (EXT-2) function for the channel to ON to un-  
scramble a scrambled channel. For details, see “Using the  
Decoder (EXT-2) function” on page 10.  
Connecting Headphones  
Use the stereo headphone socket of your TV, to connect  
headphones. As soon as you connect your headphone to the  
headphone socket, TV’s loudspeakers will automatically  
mute.  
RGB mode  
If an equipment can output the RGB signals, connect it to the  
EXT-1 (EXT.1) terminal.  
EXT-2 S Mode  
If the equipment connected to your TV set supports S-Video  
(Y/C) output from Euroconnector, you can have a better pic-  
ture quality by selecting EXT-2 S mode and connecting your  
equipment to the EXT.2 (EXT-2 S) terminal of TV. See your  
equipment's booklet to check if your equipment has such fea-  
ture.  
Via the RCA jacks  
If you have an equipment (such as a Camcorder) which has  
the RCA jacks, connect it to the Front AV (EXT-3) terminal  
with the video and audio cables.  
• If the epuipment has the mono audio jack, connect it to the  
AUDIO-L jack.  
Via the ANT (aerial) socket  
If your equipment does not have a Euroconnecter or RCA  
jacks, connect it to the TV with an aerial cable. For details,  
see the manual provided with the equipment.  
To store the test signal that comes from the equipment in a  
programme number, follow the instructions of "Tuning  
menu" on page 9. The programme number 0 is usually  
used for the external equipment.  
• After storing, you can watch images from the equipment by  
selecting the programme number which you stored the test  
signal.  
TV and Video Recoder (VCR)  
• Connect the Video Recorder to the ANT (antenna input)  
socket of the TV with the aerial cable.  
• Connect the Video Recorder to the EXT.1 or EXT.2 terminal  
with the SCART cable, or connect it to the Front AV  
(EXT-3) terminal with the audio and video cables.  
• When you watch a picture from your VCR and the picture is  
unstable, you may improve it by changing the “Mode” set-  
ting in the “TUNING” menu. (See the “Tuning Menu” on  
page 9.)  
ENGLISH - 14 -  
 
Connect the External Equipments  
Before connecting anything  
• Switch off all equipments including the TV.  
• Read the manuals provided with the equipments.  
To select an AV mode  
Pressing “AV” button on the remote control selects one of AV modes (EXT-1, EXT-2, EXT-2 S and EXT-3).  
To return to the TV mode, repeatedly press “AV” button.  
EXT.1 (EXT-1) terminal: Euroconnector (21-pin, SCART)  
• Video input, Audio L/R inputs and RGB inputs are available.  
• TV broadcast outputs (Video and Audio L/R) are available.  
EXT.2 (EXT-2) terminal: Euroconnector (21-pin, SCART)  
• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.  
• Video and Audio L/R outputs are available. (see “Setting External Source Output” on page 11.)  
• T-V LINK functions are available. (see “T-V LINK compatible VCR” on page 14.)  
Front AV (EXT-3) terminal: RCA connectors x 3  
• Video input and Audio L/R inputs are available.  
ENGLISH - 15 -  
 
Tips  
Specifications  
TV BROADCASTING  
Care of the Screen  
PAL SECAM B/G D/K L/L’  
Clean the screen with a slightly damp, soft cloth. Do not use  
abrasive solvents as they may damage the TV screen coating  
layer.  
RECEIVING CHANNELS  
VHF (BANDI/III)  
Poor Picture  
UHF (BAND U)  
Have you selected the correct TV system? Is your TV set or  
house aerial located too close to the loudspeakers, non-  
earthed audio equipment or neon lights, etc. ?  
HYPERBAND  
CABLE-TV  
(B/G: S01-S41 / S75-S79  
D/K: S01-S19, S22-S41  
L: S01-S41 / S75-S77)  
Mountains or high buildings can cause double pictures or  
ghost images. Sometimes you can improve the picture quali-  
ty by changing the direction of the aerial.  
The picture quality may degrade when two peripherals are  
connected to the TV at the same time. In such a case, dis-  
connect one of the peripherals.  
NUMBER OF PRESET CHANNELS  
200  
No Picture  
CHANNEL INDICATOR  
On Screen Display  
Is the aerial connected properly? Are the plugs connected  
tightly to the aerial socket? Is the aerial cable damaged? Are  
suitable plugs used to connect the aerial? If you are in doubt,  
consult your dealer.  
RF AERIAL INPUT  
75 Ohm (unbalanced)  
No Picture means that your TV is not receiving any trans-  
mission. Have you pressed the correct buttons on the remote  
control? Try once more.  
OPERATING VOLTAGE  
220-240V AC, 50 Hz.  
Sound  
Sound is coming from only one of the speakers. Is the bal-  
ance set to one direction extreme? See SOUND menu.  
SOUND-MULTIPLEX SYSTEMS  
Nicam + German Stereo  
Remote Control  
PICTURE TUBE  
If the remote control does not work properly, replace the bat-  
teries.  
28” 4:3  
Have you selected the wrong menu? Press “STANDARD” but-  
ton to return to TV mode or press “MENU” button to return to  
the previous menu.  
AUDIO OUTPUT POWER (WRMS.) (%10 THD)  
2 x 10  
No solution  
Switch your TV set off and on. If this does not work, call the POWER CONSUMPTION (W) (max)  
service personnel; never attempt to repair it yourself.  
120 Watt  
DIMENSIONS (WxHxD) (mm)  
ENGLISH - 16 -  
 

InFocus Projector IN1503 User Manual
Ingersoll Rand Baby Furniture 650293 x User Manual
Interact TV Baby Toy 44030 User Manual
IOGear Network Card GCS632U User Manual
Kenwood Stereo System DPX MP5110U User Manual
Kingston Technology Computer Drive DT4000M R User Manual
KitchenAid Dishwasher KAD 9 User Manual
KitchenAid Garbage Disposal KD 100 User Manual
KitchenAid Refrigerator KURS24RSBS00 User Manual
Kompernass DVD Player KH 6510 User Manual